Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 308)

Chapter 7 Applying Effects — Setting Effects
308
Adjusting 3-Way Color Collection
1)
Display the [Information] palette, and double-click [3-Way Color Correction].
f “Checking/Adjusting Effects” (w page 334)
f The [3-Way Color Correction] dialog box appears.
“[3-Way Color Correction] Dialog Box” (w page 308)
2)
Adjust the balance of each color and click [OK].
[3-Way Color Correction] Dialog Box
(1)
(2)
(5)
(7)
(8)
(3)
(4)
(6)
(1) [Black Balance]/
[Gray Balance]/[White
Balance]
Drag a point in each color to correct colors for shadow (black balance), intermediate (gray
balance), and highlight (white balance).
Drag the point of color wheel to adjust the hue, or move the slider to adjust saturation and
contrast.
(2) [Limit] Correct colors in the specified range.
Check [Hue], [Saturation], and [Luminance] to specify the range to adjust. You can set the
effect range by entering a value directly in each field or dragging the triangle slider, or grating/
slant parts.
A
B C
A: Range to apply 100% adjustment
B: Range where you increase the adjustment volume gradually
C: Range where you decrease the adjustment volume gradually
(3) [Key display] View which range is applied with the effects by setting [Limit]. The area with the effects applied
100% is displayed in white; 0% in black.
(4) [Histogram display] Display a calculated histogram for each of hue, saturation, and luminance.
(5) [ColorPicker] Select a color from the displayed image on the Player or the Recorder.
(6) Preview setting “Preview setting” (w page 310)
(7) Key frame setting “Key frame setting” (w page 311)
(8) [Default] Click [Default] in each balance frame to reset only the parameters related to that balance to
their default values.
Click [Default] at the bottom of the window
to delete all keys and restore the default settings for all the parameters.