Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 311)

Chapter 7 Applying Effects — Setting Effects
311
r Key frame setting
You can change the parameters of color correction along the time axis, and play it to check the result.
(1) (2) (3)
(4)
(5)
(6) (8) (9) (7)
(1) Timeline controller Drag the slider to the left and right to adjust the time scale display unit. Move the slider to the
left to reduce the display unit, or to the right to increase it. The right end is [Fit].
(2) Playback/Tool buttons
: Play back the timeline on the Recorder.
: Repeatedly play back the clip currently being edited.
: Undo an operation.
[Ctrl] + [Z]
: Redo the undone operation.
[Ctrl] + [Y]
: Switch the changes of each parameter to the chart view. In the chart view, the timeline is
represented by a chart display of the selected key. The parameters can be edited by moving
the keys up and down.
The numerical values and gradations of the Y axis can be changed by entering numerical
values.
(3) Time scale for key
frame
Display a scale with the unit selected in the time scale setting on the timeline.
Right-click the time scale and click [Timeline Timecode] to display the timecode of the timeline
or click [Zero base Timecode] to display the timecode with the beginning of the clip as 0.
If a sequence marker is set for the position where the clip is placed, right-click the time scale
and click [Go to Previous Sequence Marker] or [Go To Next Sequence marker] to move the
timeline cursor to the previous or next sequence marker.
(4) Time scale settings Click here to toggle the specified display unit and [Fit].
Click the left arrow to reduce the display unit, or click the right arrow to increase the display
unit.
(5) Expand button Click this button to configure detailed settings for each item.
You can edit the parameters by moving the cursor to a value input or control and dragging it
when the mouse cursor shape changes.
(6) Enable/Disable Unchecking the item disables the parameter settings. To configure a key frame, check the
effect name.
(7) [Add default key] Click this item to set the default key frames of each parameter item at the timeline cursor
position.
(8) Key frame setting
Click in the center to set a key frame on the position of the timeline cursor. If the timeline
cursor is on the key frame, the key will be deleted.
Click the left and right arrow to move to the previous and next key frame.
(9) Key frame timeline Automatically add a key frame when you edit an effect at the timeline cursor.
If you expand each parameter item, you can edit the parameter by dragging key upward or
downward.
2
f Right-click the timeline for key or key frame to display a menu to add/delete keys or switch the method of interpolation between key
frames. You can select the interpolation method from [Hold], [Line], and [Bezier].
f When the item name of a parameter is right-clicked and [Clear parameter of (item)] is clicked, all key frames for that item are deleted.
f When [Shift] + [V] on the keyboard are pressed, a key frame is added to all parameters with a valid key frame setting at the timeline
cursor position.
f When [V] on the keyboard is pressed, a key frame is added to the currently selected parameter at the timeline cursor position.