Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 239)

Chapter 6 Editing Timelines — Clip Operations
239
(4) Timecode (Clip) Directly enter the value to specify which place on the timecode of the clip the key at the
timeline cursor position is to be placed.
(5) Key setting field This space is used for setting the key. A green line is displayed at parts where the speed has
not been changed.
(6) Time difference display
area
This space displays the values of the time difference that occurs when keys are added as a
connected line.
(7) Clips Display the line connecting the key and the corresponding frame on a position on the clip.
(8) [Field Option] The [Field Option] dialog box appears.
“[Field Option] Dialog Box” (w page 240)
(9) [Full Range] Display all margin sections of the clip. Checking this item when trimming or a cut operation has
been performed after setting the time remap can display the keys of the cut section.
(10) [Enable] Switch the enable/disable setting for the time remap setting. Uncheck this item to disable the
setting.
One Frame at a Time Playback (Freeze Frame)
Stop and play back the In or Out points of the clip. Clips can be stopped for not just the length of the clip but also the first half or second half
from a desired frame.
3 Note
f Freeze frame can be set to video clips on the timeline.
f The freeze frame setting is deleted when a clip set with a freeze frame is added from the timeline to the bin.
2
f Any desired range of clips can also be frozen by time remap. Add keys to determine the range to freeze, and move to the position to stop
the 2 key frames on the clip side.
1)
Right-click a clip, and click [Time Effect] → [Freeze Frame] → [Setup].
1 Alternative
f Click [Clip] on the menu bar, and click [Time Effect] → [Freeze Frame] → [Setup].
2)
Check [Enable freeze frame] in the [Freeze Frame] dialog box.
3)
Select the fix position, and click [OK].
f When the In point is selected, the frame of the In point is freeze-framed for the length of the clip, and when the Out point is selected, the
frame of the Out point is freeze-framed for the length of the clip.
2
f When a clip set with freeze frame enabled is trimmed, operation changes as follows depending on the fix position.
g When the In point side of a clip with a fixed In point is trimmed, the displayed frame also moves matched to the trimming. Operation is
not affected when the Out point side has been trimmed.
g When the Out point side of a clip with a fixed Out point is trimmed, the displayed frame also moves matched to the trimming. Operation
is not affected when the In point side has been trimmed.
Freeze-framing the First Half or Second Half from a Desired Frame
1)
Move the timeline cursor to the frame to freeze.