Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 433)

Chapter 11 Interaction with GV STRATUS — Interaction Function with GV STRATUS
433
3)
Set each item.
[Server] This is the list of servers (K2 Media servers) that is displayed in the folder view of the source
browser.
[Add] Click this item to display the [Server settings] dialog box for adding connection servers.
“[Server settings] Dialog Box” (w page 433)
[Delete] Delete servers from [Server].
[Modify] Change the server settings.
[Move Up]/[Move Down] Sort the list.
Select a server from [Server] and move the selected server one place up or down with each
click of [Move Up] or [Move Down].
[Settings] Display the settings of the connection selected in [Server].
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
[Server settings] Dialog Box
[Name] Enter the name of the server to display in the folder view.
[Address] Enter the IP address or server name of the server.
[Username]/[Password] Enter the user name and password required when making the connection.
[Domain] Enter the domain of the server.
[Storage Drive] Select the drive you assigned on the client PC side to the V: drive of the server.
[Show only SNFS drivers] Normally, check this item.
[Connection Test] Click this button to test the connection to the server with the settings entered in the [Server
settings] dialog box.
2
f To use the product in stand-alone with K2 Summit, set the K2 Summit C: drive to be used for the network drive of the client PC. Check
[Show only SNFS drivers] in the [Server settings] dialog box, and then select the assigned drive from the [Storage Drive] list.
Browser Settings
Set items that are allowed when connecting to the K2 Media server.
1)
Click [Settings] on the menu bar, and click [System Settings].
2)
Click the [Importer/Exporter] tree, and click [K2 (SAN)] → [Browser].
3)
Set each item.
[Allows Users to Rename/Delete Clips
and Bins.]
Check this item to allow renaming/deleting clips and bins that are managed by a server.
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
K2 Project Importer Settings
You can configure the behavior when importing an edit list in Program/List format that will be managed by a K2 Media server to EDIUS as a
sequence.
1)
Click [Settings] on the menu bar, and click [System Settings].
2)
Click the [Importer/Exporter] tree, and click [K2 (SAN)] → [K2 Project Importer].
3)
Set each item.