Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 78)

Chapter 3 Edit Settings — [System Settings]
78
[Buffered Frames Before Playback] Set the number of frames buffered when starting playback. When playback stops because it
cannot keep up with the speed just after playback is started, the situation may be improved by
increasing the number of frames.
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
[Capture]
Set EDIUS capture operations, processing at automatic detection of events, and other operations.
1)
Click [Settings] on the menu bar, and click [System Settings].
2)
Click the [Application] tree, and click [Capture].
3)
Set each item.
[Margin] Set the length of the margin added at In and Out points at capture operation.
[Confirm Reel Name Setting after
Setting Device Preset]
After a device preset is selected in the [Select Input Device] dialog box at a capture operation,
the dialog box for setting the reel name appears.
[Confirm File Name at Capture] Check and set the file name at a capture operation. If you select [Before Capture], you can set
the destination and file name before performing capture. If you select [After Capture], you can
set the destination and file name after capture is finished.
[Load to Player after Capture] Play back the file created after capture automatically.
[Correct Audio Errors Automatically] Correct audio errors automatically at a capture operation.
[Set file names for 2 file Capture] If you create 2 files for the L side (for left eye) and the R side (for right eye) with 2 streams at
stereoscopic source capture, set the suffix for the file name for L and R sides.
[Automatic Detection of Capture
Events]
Select the conditions for automatically inserting cuts in files at capture operation. Cut insertion
conditions are as follows:
f [At Timecode Break]
f [When Aspect Ratio Changes]
f [When Sampling Rate Changes]
f [When the recorded Time Date Changes]
[When an Event is Detected]
Select how cut positions are processed.
If you select [Divide Files], files are divided at the cut position. If you check [Group Divided
Files as Sequence], multiple divided files are registered to the bin as a single sequence clip.
If you select [Add Marker], a clip marker is set at the cut position.
[Deck Control after Capture] Select the deck state after capture operation from the list.
2
f Set voice over margins at [Margin] under [Capture].
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
[Render]
Set the reference of rendering options or the timing to delete rendering files.
1)
Click [Settings] on the menu bar, and click [System Settings].
2)
Click the [Application] tree, and click [Render].
3)
Set each item.