Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 184)

Chapter 5 Bin Operations — Bins and Clips
184
1)
Select and right-click the multiple clips in the bin, and click [Set as Sequence].
f The created clip is registered in the bin as a sequence clip.
f Clips set as a sequence take the name of the first joined clip as its clip name.
f “Registering Consecutive Still Images” (w page 151)
2
f Clips are joined in the sorting order of the bin.
f Clips are joined with the In and Out point settings of the video part held by the original clip intact.
3 Note
f Conditions for setting as a sequence are as follows:
g The clip type, image size and aspect ratio of all clips must be matching.
g For video, the field order and frame rate of all clips must be matching.
g For audio, the sampling rate, quantization bitrate and number of channels of all clips must be matching.
Canceling a Set Sequence
Cancel joining of a sequence clip.
1)
Right-click a sequence clip in the bin, and click [Cancel Sequence].
f After the sequence is canceled, the clip name returns to the one before the clips are joined.
2
f The In and Out point settings that were held by the clips before they were joined as a sequence are restored.
Creating Color Bar/Color Matte/Title Clip
The following explains how to create color bar clips, color matte clips and title clips.
Color Bar Clips
Create a color bar clip.
1)
Click [New Clip] in the bin.
2)
Click [Color Bars].
f The [Color Bars] dialog box appears.
3)
Make the color bar settings, and click [OK].
1 Alternative
f Right-click a blank area in the clip view, and click [New Clip] → [Color Bars].
f Click [Clip] on the menu bar, and click [Create Clip] → [Color Bars]. The color bar clip is registered to the bin.
2
f You can change settings from the [Color Bars] dialog box by the following operations: