Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 72)

Chapter 2 Project Settings — Restoring Offline Clips
72
[Restore and Transfer Clips] Dialog Box
(1) (2)
(3)
(5)
(6)
(7) (8) (9)
(4)
(1) [Refresh] Restore clips to which the restoration method is set.
(2) [Range] Select the target range of the clips from the list.
(3) Clip list
: Offline clips
Clips whose links to the source are disconnected.
: Clips with restored links
Clips whose links to the source are restored.
(4) [Restoration Method] [Relink (select file)]
The [Open] dialog box appears. Select the source to re-link.
[Relink (select folder)]
The [Browse For Folder] dialog box appears. Search the source with the same name in the
specified folder to re-link.
[Undo transfer]
Re-link the original source prior to the transition to the project folder.
[Capture all]
Click [Start batch capture] to display the [Batch Capture] dialog box to register the information
of the entire source.
“Importing Sources All Together (Batch Capture)” (w page 145)
[Capture only areas used in timeline]
Click [Start batch capture] to display the [Batch Capture] dialog box to register the clip
information used in the timeline.
[Do nothing]
Offline clips are not re-linked or captured.
(5) [Link only files that
match exactly]
Check this item to specify only the files with exactly the same information in the original file to
be re-linked.
(6) [Ignore file extension] Check this item to include files with different extensions for re-link.
(7) [Start batch capture] This item is enabled when either [Capture all] or [Capture only areas used in timeline] is
selected from the [Restoration Method] list.
Click this button to display the [Batch Capture] dialog box.
(8) [OK] Restore the offline clips with the specified settings.
(9) [Cancel] Close the dialog box without restoring the offline clips.
2
f You can change the default setting of [Restoration Method].
“[Restore Offline Clip]” (w page 101)
Capturing and Restoring
If the source of the offline clips does not exist in the hard drive, you can restore the clips by recapturing from the original source (recorded
tapes).
1)
In the [Restore and transfer clip] selected dialog box, click [Capture entire clip ] or [Capture only the
area used in timeline].
f The [Batch Capture] dialog box appears.
“Importing Sources All Together (Batch Capture)” (w page 145)