Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 386)

Chapter 9 Audio Operations — Adding and Editing Audio
386
Adding and Editing Audio
Adding Narration and Effects
Addition of Speech with Voice Over
Voice over is a function for adding narration or sound effects while previewing a timeline clip. You can add audio (sound effect) while
previewing a scene.
3 Note
f For microphones or other voice entry devices the device preset must be set in advance.
“Registering Device Presets” (w page 109)
1)
Map the audio channel and set an In point at the position in which to place the audio.
f “Setting Channel Mapping” (w page 215)
f “Setting the In and Out Points on the Timeline” (w page 217)
2)
Click [Toggle Voice Over Display] of the timeline.
f The [Voice Over] dialog box appears.
1 Alternative
f Click [Capture] on the menu bar, and click [Voice Over].
3)
Select a preset from the [Device Preset] list.
f The device preset must be set in advance. The preset cannot be selected if only one preset is registered.
“Registering Device Presets” (w page 109)
4)
Adjust the volume of the source data with the [Volume] slider.
f Adjust the level meter visually so that the volume does not exceed 0 dB.
5)
Select [Track] from the [Output] list.
[Bin] Add the audio clip only to the bin.
[Track] Add the audio clip both to the A track specified in step 1) and to the bin.
6)
Enter a file name, and click [...] to specify the save destination.
7)
Click [Start].
f The white circle in the upper left of the Recorder blinks to start the count down. The white circle turns red when recording starts. If there is
an audio clip on the export destination track, the audio on the track will mute at the same time as audio recording begins.
2
f The time taken between clicking [Start] and the start of recording changes according to the time set in [Application] in [System Settings]
→ [Margin] in [Capture], and [Preview] in [User Settings] → [Preroll Time] in [Playback].
8)
Click [End].
f Clip playback and audio data creation are stopped and a dialog box appears to confirm whether to add the created file.