Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 187)

Chapter 5 Bin Operations — Bins and Clips
187
1)
Select and right-click the clip to set as stereoscopic in the bin, and click [Set as Stereoscopic].
f The [Stereoscopic setting] dialog box appears.
f The following files are automatically searched: files which are placed in the same folder as the clip selected in step 1), have the same
extension, and are allowed to be stereoscopic. The search result is displayed in [Select pair files] as a list.
2
f If a clip that is transferred to a project folder, the folder in which the clip is saved before transfer will be searched.
2)
Select a file from the [Select pair files] list.
f Select a file to be used in pair based on the information such as [Similarity].
3)
Set each item.
[Select pair files] Displays the information for the searched files.
If files to be used in pair do not exist, click [Browse folder] to change the search folder.
Click in [Sync] to select the position to synchronize the L side and the R side clips. It will be
reflected in the [Preview] display.
Every click switches the sorting order to be ascending or descending.
[Preview] Displays the L side clip at the left, and the R side clip at the right. Move the slider or enter the
timecode in [Cur] to view video.
Click [Monitor preview] to view the stereoscopic video of the current position in the preview
window.
Click to switch the L side and the R side video.
4)
Click [OK].
2
f After setting as a stereoscopic clip, the clip markers which the L side and the R side clips contain are merged.
f The length of the clip will be determined by the area with the frames on both the L side and the R side clips, after synchronizing the L side
and the R side clips.
f The capture margin will be set to the longer one of either the L side or the R side capture margin, after synchronizing the L side and the R
side clips.
f The clip length and information other than the capture margin of the L side clip will be carried over.
f The In and Out points information of the L side and the R side clips will be deleted after setting as a stereoscopic clip.
Setting Separate L and R Clips in the Bin as Stereoscopic
If both the L side (for left eye) and the R side (for right eye) clips are in the bin, set them as a single stereoscopic clip.
1)
Select and right-click the L side and the R side clip (or clips) to set as a stereoscopic clip in the bin,
and click [Set as Stereoscopic].
f The [Stereoscopic setting] dialog box appears.
2)
Set each item.
[Stereoscopic clips] Displays information on the stereoscopic clip.
The clip name to be created as a stereoscopic clip is displayed in [Clip Name].
Click in [Sync] to select the position to synchronize the L side and the R side clips. It will be
reflected in the [Preview] display.
When multiple clips of the L and R sides are selected, click [Auto pairing] to automatically sort
them so that clips with high degree of similarity are paired.
[Preview] Displays the L side clip at the left, and the R side clip at the right. Move the slider or enter the
timecode in [Cur] to view video.
Click [Monitor preview] to view the stereoscopic video of the current position in the preview
window.
Click to switch the L side and the R side video.
3)
Click [OK].
2
f After setting as a stereoscopic clip, the clip markers which the L side and the R side clips contain are merged.
f The length of the clip will be determined by the area with the frames on both the L side and the R side clips, after synchronizing the L side
and the R side clips.