Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 324)

Chapter 7 Applying Effects — Setting Effects
324
[Chromakey] Dialog Box
(1) (2) (3) (4)
(5)
(6)
(7)
(8)
(9)
(10)
(1) Display switching Check [Key display] to display a part available to cut out in black. Check [Histogram display] to
display the histogram.
(2) Color selection Select a color to transmit from the window.
You can select a color (key color) to transmit by 4 methods.
(3) [Auto Fit] Click this button to automatically define keyer settings appropriate for the selected key color.
(4) [Detail] Define the detailed keyer settings.
(5) [Rectangle] Apply chromakey to a particular range.
(6) [Cancel Color] Add the key color and its opposite color onto the border part where the key color and other
colors are bounded so that a natural composite image can be created.
(7) [Autofit tracking] Check [Enable] to adjust the key color variation automatically.
(8) [CG mode] Check this item to set the parameter for CG.
(9) [Linear Cancel Color] Check this item to resolve the bleeding of the blue screen or green screen or the discoloration
by reflections.
(10) [Soft Edge] Check this item to blur the border of the background image and overlaid image.
(1)
(2)
(1) [Fade Setting] Check [Enable] to add fade effects to In and Out of the area applied with chromakey. Duration
can be set to each of In and Out.