Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 102)

Chapter 3 Edit Settings — [User Settings]
102
3)
Set each item.
[Margin when restoring from batch
capture]
When capturing only necessary areas (parts used in the timeline), set the margin to use for
optimization (combining of capture areas). When multiple offline clips are placed in closer
position than the docking margin time, they are combined into 1 clip (i.e optimized).
[Restore Default] Set the default displayed restoration method for [Restoration Method] in the [Restore and
Transfer Clips] dialog box when opening project files and importing EDL.
[Can be Transferred :]
Select from [Transfer All], [Transfer Only Used Area], or [Do nothing].
[No file information :]
Select from [Capture all], [Capture only areas used in timeline], or [Do nothing].
[Can be Captured]
Select from [Capture all], [Capture only areas used in timeline], or [Do nothing].
“Restoring Offline Clips” (w page 70)
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
[Partial Transfer]
Set partial transfer.
“Automatic Partial Transfer at Addition to the Timeline/Registration to the Bin” (w page 167)
[Input Controller]
Fader/Jog Controller
Assign keys to controller buttons when using the option fader controller and jog controller.
3 Note
f When you set Behringer BCF2000 for this first, a message will appear to notify you that the preset must be installed. Select the preset
No. to be installed from the [Preset No.] list, and click [Next]. Click [Start] to start the installation.
This operation is needed only once and need not be performed from the next time onwards.
1)
Click [Settings] on the menu bar, and click [User Settings].
2)
Click the [Input Controller] tree, and click the fader controller or jog controller to be used.
3)
Set each item.
Example:
For [MKB-88 for EDIUS]
Controller display [Control] tab
Displays an overview of the controller. Buttons assigned an operation are displayed in yellow. If
you click a button to assign an operation to, the [Select Operation] dialog box appears.
[List] tab
Displays the buttons, assigned operations, and repeat enable/disable setting in a list. Click
the list and [Assign] to open the [Select Operation] dialog box. Click [Not Assign] to cancel
operation assignments.
“[Select Operation] Dialog Box” (w page 103)
[Import]/[Export] Import and export controller settings.
[Default] Return settings to their defaults.
4)
Click [OK].
f You can continue to set other items by clicking [Apply].