Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 98)

Chapter 3 Edit Settings — [User Settings]
98
[Source Timecode Priority] When the source timecode is output or displayed, set the track to display the timecode for from
the tracks that have clips with timecode information placed on them, including T tracks.
[Upper Track]
[Lower Track]
[Source audio pass through and
ancillary data priority]
When exporting audio bitstream or ancillary data (including closed caption), set the track to
export from the tracks on which the clips with those information are placed (including T track).
* The ancillary data playback is supported only when STORM 3G ELITE or STORM 3G is used.
3 Note
f Even when [Lower Track] is selected in [Source Timecode Priority], the source timecode of the lower track is not displayed if the
transparency of the upper track is not set (i.e. transparency is 100%).
4)
Click [OK].
f You can continue to set other items by clicking [Apply].
[Monitor]
Set the display content in full screen view on the monitor or in stereoscopic edit mode.
1)
Click [Settings] on the menu bar, and click [User Settings].
2)
Click the [Preview] tree, and click [Monitor].
3)
Set each item.
f Once the display content of each monitor is set, no further setting is needed from the next time.
[No.] Enter the monitor number. Monitor numbers from “2” onwards are external monitors.
[Full Screen Preview Contents] [Full Screen Preview Contents]
Displays content of the full screen view.
Click the list to display a menu and change display content for each monitor.
[No full screen preview]
Disable the full screen view.
[Player/Multicam Source]
Display the Player screen in full screen view. In the multicam mode, the videos of each track
with camera assigned are displayed in full screen view.
[Recorder/Selected Camera]
Display the Recorder screen in full screen view. In the multicam mode, the video of the
selected camera is displayed in full screen view.
[Auto]
Display the same screen as video output in full screen view.
[Stereoscopic flip horizontal] Check this item to display video with the L side (for left eye) and R side (for right eye) swapped.
[Using NVIDIA 3D VISION/Intel InTru
3D]
If your system supports NVIDIA 3D VISION or Intel Intru 3D, check this item to enable the
stereoscopic view ([L/R Dual Stream]) using NVIDIA 3D VISION or Intel Intru 3D on the
primary monitor.
[Monitor Check] Click this item to display the monitor number on the respective monitor.
3 Note
f NVIDIA 3D VISION or Intel Intru 3D can be used only in D3D full screen mode.
It takes a while to display the stereoscopic video on the monitor.
f 3D VISION is applied only to the primary monitor.
4)
Click [OK].
f You can continue to set other items by clicking [Apply].