Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 413)

Chapter 10 Export of Edited Contents — Exporting in File Formats
413
[Encode Settings] [Segment Encode]
Check this item to export a clip of a raw source without re-encoding.
This increases the output speed.
[Bit Rate]
Select a bitrate type.
[CBR] sets a fixed transfer rate, allocating a fixed number of bits during the encoding process.
Enter an average bitrate in [Average].
[VBR] sets a variable transfer rate, altering the number of assigned bits according to the
complexity of the movement or image quality. Enter the average bitrate in [Average], and
maximum bitrate in [Max].
[Quality/Speed]
Select quality from the list.
[Field Order]
The field order can be selected if it is in SD format.
[GOP structure]
Select I, P and B frame patterns of the GOP from the list. Normally, select [IBBP].
[I-Frame Only] is comprised of only I-pictures. Editing is made easier, but the amount of data
increases in size.
[Picture count]
Enter the number of frames included in 1 GOP.
[Closed GOP]
If it is checked, the GOP will be closed. Although the amount of data increases, the video can
be re-edited using software that supports GOP-based editing, as the information is completed
within each GOP. Normally, leave this item unchecked.
[Chroma Format]
Select a YUV pixel format from the list.
[Profile/Level]
Select a profile & level. If [Chroma Format] is [4:2:0] and [4:2:2], the profile will be set to Main
Profile and 422Profile, respectively. The level for SD image quality will be Main Level, and
the level for HD image quality will be High Level. The profile & level changes according to the
format selected in [Chroma Format].
[Bit Rate] Select a bitrate from the list.
[Audio settings] [Channels]
Select the number of audio channels you want to export from the list. [Current setting] is the
number of channels configured in the project settings. If [Enable Conversion] is checked for the
exporter and the number of channels for the audio format is changed from the project settings,
the number of channels will be the number set here.
[Quantization Bit Rate]
Select the number of bits to be used during sampling from the list. [Current setting] is the
number of bits configured in the project settings.
[Channels Per Track]
Specify the number of channels to be included in 1 audio track for MXF.
[Type]
Select the audio format to export.
[System Type] Select a system item format.
[KAG Size] Select a KAG (KLV Alignment Grid) size.
3)
Configure the export and click [OK].
Exporting Stereoscopic Projects to File
Projects created in the stereoscopic edit mode can be exported to file.
Exporting L/R to a File
Export the data of the L and R sides of the project to a file.
1)
Select an exporter in the category tree in the [Print to File] dialog box.
f “Exporting Files with an Exporter” (w page 392)
2)
Select one of [L/R Dual Stream], [Left only], [Right only], [Side by Side], [Top and Bottom], [Line
Interleave], [Blend], [Anaglyph], or [Difference] from the [Stereoscopic] list.
f [L/R Dual Stream] exports the video of the L and R sides to a single dual stream-compatible file.
f [Left only]/[Right only] exports video of the L or R side only to a single file.
f [Side by Side]/[Top and Bottom]/[Line Interleave]/[Blend]/[Anaglyph]/[Difference] combine and export the video of the L and R sides to a
single file.
“Stereoscopic Processing Type” (w page 132)