Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 71)

Chapter 2 Project Settings — Restoring Offline Clips
71
[Restore and transfer clip] Selected Dialog Box
[Capture entire clip ] The [Batch Capture] dialog box appears. Capture the entire source.
“Capturing and Restoring” (w page 72)
[Capture only the area used in
timeline]
The [Batch Capture] dialog box appears. Capture only the part used in the timeline. If there are
multiple offline clips, replace each offline clip with the captured source.
“Capturing and Restoring” (w page 72)
[Find from captured files] Search the source by reel number (Ubit) and timecode (between In and Out points) in already
captured files.
“Searching File by Reel Number to Restore” (w page 73)
[Open the clip restoration dialog] The [Restore and transfer clip] dialog box appears. Restore the offline clips by reestablishing
a link to the disconnected source, by retransfer the source that cannot reference a part of the
clip, or by replacing a camera proxy file with a high-resolution source.
“Re-link and Restoration” (w page 71)
[Close] Click [Close], and click [Yes] to display the operation screen without restoring the offline clip.
Re-link and Restoration
You can search the source from the hard disk drive to re-link.
1)
Click [Open the clip restoration dialog] in the [Restore and transfer clip] selected dialog box.
f The [Restore and Transfer Clips] dialog box appears.
“[Restore and Transfer Clips] Dialog Box” (w page 72)
1 Alternative
f To restore the clips on the timeline, double-click the offline clip icon on the status bar. In this case, only the offline clips on the timeline are
displayed in the clip list in the [Restore and Transfer Clips] dialog box.
2)
Select the target range of the clip from the [Range] list.
3)
Select a clip (or clips) from [Clip list], and select either [Relink (select file)] or [Relink (select folder)]
from the [Restoration Method] list.
4)
Select the source from the [Open] dialog box, and click [Open].
f If [Relink (select folder)] is clicked in step 3), select a folder in the [Browse For Folder] dialog box and click [OK].
5)
Click [OK].
6)
Click [Close] in the [Restore and transfer clip] selected dialog box.
1 Alternative
f Double-click a offline clip on the timeline or in the bin window, and perform operations after step 3).