Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 373)

Chapter 9 Audio Operations — Volume/Pan Adjustment
373
Volume/Pan Adjustment
Adjusting the Volume and Pan of a Clip
Adding a Rubber Band Point
Two rubber bands are displayed on audio clips placed on the timeline; a volume rubber band (orange line) used to adjust volume and a pan
rubber band (blue line) used to change the L/R stereo balance. Rubber band points can be added to adjust the shape of the rubber band.
1)
Click the expand button for the audio on the track panel.
f The track expands and the rubber band and the waveform are displayed. For stereo audio, a waveform is displayed in each channel.
1 Alternative
f Expanded display of audio: [Alt] + [S]
2)
Click [Volume/Pan].
f Clicking it switches between Volume, Pan and Lock.
“Volume/Pan Rubber Band” (w page 373)
3)
Click on a rubber band in the position where you want to apply a change.
f A point is added that is used to adjust the volume or pan.
1 Alternative
f Right-click a rubber band in the position you want to add a point, then click [Add/Delete].
Volume/Pan Rubber Band
r Volume rubber band (orange line)
r Pan rubber band (blue line)
Adjusting the Rubber Band
You can adjust the volume and pan of a clip. You can also adjust the volume and the pan along to the time axis by adjusting the shape of the
relevant rubber band.
Adjusting Using a Point
1)
Display the volume rubber band or the pan rubber band, and add a rubber band point.
f “Adding a Rubber Band Point” (w page 373)