Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 207)

Chapter 6 Editing Timelines — Timeline Settings
207
Timeline Display
Marking the Time Scale
You can mark the time scale with the In and Out points for setting the range to apply operations in and sequence markers to serve as the
reference for moving tracks, etc.
(1) (2)
(3) (4) (3)
(1) Rendering options Display the required level of rendering for playing back the timeline in color by level.
“Color Coding of Time Scale” (w page 278)
(2) Timeline cursor Move the timeline cursor by dragging to the left or right.
(3) In/Out points Indicate the In and Out points of the timeline. The range to apply operations in can be restricted
between In and Out points.
“Setting the In and Out Points on the Timeline” (w page 217)
(4) Sequence marker This is the mark to set on the timeline.DVDThis marker becomes the chapter at DVD output, for
example. The sequence marker changes color to yellow when the mouse cursor is pointed on
the sequence marker, and the timecode or comment (if set) is displayed.
“Setting Sequence Markers” (w page 267)
“Sequence Marker Types” (w page 268)
Time Scale Settings
You can change the display unit for the time scale. The time scale can be displayed in the following units:
f Frames, seconds, minutes
f Fit (The display unit is automatically adjusted to fit the display range of the timeline window.)
(1)
(2)
(1) Time scale controller
(2) Time Scale Settings
1)
Click the list button at the time scale settings, and click the display unit.
f Click [Fit] to adjust the time scale to display all clips on the timeline. Click [Undo] to return to the previously set display unit.
1 Alternative
f Click the center of the time scale setting to switch the currently set display unit to [Fit].
f Drag the time scale controller. Move the slider to the left to reduce the display unit, or to the right to increase it. The right end is [Fit].