Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 240)

Chapter 6 Editing Timelines — Clip Operations
240
2)
Right-click a clip, and click [Time Effect] → [Freeze Frame] → [Before Cursor] or [After Cursor].
f The selected clip is cut at the timeline cursor position, and freeze frame is set to clips before or after the cursor. When freeze frame
has been set after a cursor, the fix position becomes the In point, and when freeze frame has been set before a cursor, the fix position
becomes the Out point.
1 Alternative
f Click [Clip] on the menu bar, and click [Time Effect] → [Freeze Frame] → [Before Cursor] or [After Cursor].
3 Note
f Freeze frame cannot be set when the timeline cursor is located at a transition between clips.
Field Options
You can set processing options for reducing flicker, for example, when slow motion has been set.
1)
Select a clip.
f Multiple clips can be selected and set in a single operation.
2)
Click [Clip] on the menu bar, and click [Time Effect] → [Field Option].
f The [Field Option] dialog box appears.
“[Field Option] Dialog Box” (w page 240)
1 Alternative
f Right-click a clip and click [Time Effect] → [Field Option].
3)
Set each item and click [OK].
[Field Option] Dialog Box
[Processing Option] Set the processing option to reduce flicker during slow motion. Set [Deinterlace when speed is
below 100%] when video is affected by the scanning line and flickers when a slower playback
speed has been set.
[Use nearest neighbor] Check this item to interpolate the length of the clip by continuously displaying the same frame.