Grass Valley EDIUS Pro v.7.4 Reference Manual - Manual (Page 405)

Chapter 10 Export of Edited Contents — Exporting in File Formats
405
2
f If you want to edit a menu, etc. use Disc Burner to write the project to DVD or BD.
“Exporting to Disc” (w page 419)
3 Note
f When exporting to the internal hard disk, internal memory or removable disk of an AVCHD camera for playback on the AVCHD
camera, you may be unable to perform the export or playback depending on the camera.
f You cannot write AVCHD streams from EDIUS directly to a DVD-R or BD.
1)
Click [AVCHD] in the [Print to File] dialog box category tree.
f “Exporting Files with an Exporter” (w page 392)
2)
Select an exporter, and click [Export].
f To write to removable media, click [AVCHD Writer] or [AVCHD 3D Writer], and proceed to step 3).
f To export to an AVCHD format file without writing to removable media, click [AVCHD] or [AVCHD 3D], and proceed to step 5).
3 Note
f Depending on the type of save destination, a warning message may be displayed saying that data will become unrecognizable. Be
sure to create a backup before export, as required.
3)
Select [Drive] in [Destination].
f The SD memory card or memory stick connected to the PC will be recognized as an external drive.
2
f You can select [Folder] and click [Select] to export an AVCHD stream to a specific location on the PC.
4)
Select [SD Memory Card] or [Memory Stick / HDD Camera] in [Format].
f Select according to the media being used.
5)
Configure each item in the [Basic Settings] tab and [Extended Settings] tab.
f For the setting items, see the descriptions given for the [Basic Settings] tab/[Extended Settings] tab in “Exporting to a BD Output Format”.
“Exporting to a BD Output Format” (w page 400)
6)
Click [OK].
f For [AVCHD] or [AVCHD 3D], set a file name and save destination, and click [Save].
2
f If a stream file size exceeds 2 GB, it will be split up before export.
Exporting in 3DA1 Format
Projects can be exported in the 3DA1 format to an SD/SDHC memory card. A file can be exported to any desired save destination.
If exporting to an SD/SDHC memory card, make sure to connect the memory card to the PC before export.
1)
Click [AVCHD] in the [Print to File] dialog box category tree.
f “Exporting Files with an Exporter” (w page 392)
2)
Click [AVCHD (Dual Card 3D) Writer], and click [Export].
3)
Set the export destination for the L side and the R side in [Destination 1] and [Destination 2]
respectively.
f To export to a camera, select [Drive], and set the export destination from the list.
f To export to the hard disk on the PC, select [Folder], and click [Select] to set the export destination.