Toa N-8000 Series - Manual (Page 96)

1-79
Chapter 1 GENERAL DESCRIPTION
9. PAGING FuNCTION OuTLINES
There are two types of paging: (1) PA paging by way of external PA equipment and (2) Station paging by way of
the station's internal speaker. Both types have access to the (1) zone paging function which pages one zone, (2)
the selectable paging function which pages multiple selected zones, and (3) the all-call paging function which
pages all zones simultaneously.
9.1. Paging Types
9.1.1. PA paging (Only when the N-8000EX/8000MI/8000AF is used)
Connecting PA equipment to the N-8000EX exchange's or N-8000MI multi interface unit's or N-8000AF audio
interface unit's output terminal permits PA paging to be made by dial operation at the station.
N-8000EX
N-8500MS
N-8000EX
LAN
PA paging
N-8000MI
PA paging
Station Paging
Station Paging
9.1.2. Station paging
Performing dial operation at a station permits paging to be made to other stations' internal speakers.
When paging is made to stations engaged in conversation, its behavior depends on the following priority modes,
either of which can be selected: "Paging priority" that puts the busy stations on hold and allows them to be
paged, and "Conversation priority" that allows the paging to go through except the busy stations.
Use the supplied N-8000 Setting Software program to perform the mode setting.
LAN
N-8000MI
Amplifier
Broadcast to
desired channel