Toa N-8000 Series - Manual (Page 143)

2-32
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
3.2.2. Zone number designation response
If the paged party responds by pressing the designated zone number, the paging party who made the paging
to the designated zone last is called and put through to the paged party.
When making a paging, the paging party should announce the paging zone to respond.
[Operation]
Press the Paging Response key, followed by zone number paged.
Note
Enter a zone number with the digit length (1 − 3 digits) set with the N-8000 Setting Software.
The paging party who made the paging to the designated zone last is called and put through to the paged party.
[Example]
Zone 1 Zone 2
Speakers
Hello, Mr. TOA.
Please respond to Response 002.
0 0 2
(Zone number with
3-digit length)
The station that can make response is as follows.
• Station assigned to the paged zone
• Station assigned to the paged zone and station connected to the same exchange as the PA paging output is
connected to.