Toa N-8000 Series - Manual (Page 566)

6-19
Chapter 6 SYSTEM SETTINGS USING THE BROWSER
5.9. N-8500MS/8510MS
[Operation buttons]
(1) Refresh
Updates status data for speech path, line, and call-in*.
* Call-in status refers to one station being called by others when the N-8000 system's call response mode
is set to "Selective Response."
(2) Terminal No. and line No. buttons
Used to display line number or station number.
[Operation status]
Displays the IP master station's current status of speech path and line. Pressing the Refresh button updates
data.
(1) Calling Station
Displays the number of the calling station.
(2) Called Station
Displays the number of the called station.
Only when the system is set to
"Selective Response" mode
The screen below is an example for the N-8500MS.