Toa N-8000 Series - Manual (Page 541)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
5-131
8.3. Create and Test-listen to the Original Messages
Click the [List of Original Messages] tab on the message paging setting screen.
The list of original messages that have been created is displayed.
[Screen description]
(1) Recording/playback progress indicator
Progress bar indicates the progress of the
process during recording or playback.
(2) playback button
Plays back selected messages or recorded
messages (not saved).
(3) pause button
Temporarily stops message recording or
playback of selected or recorded messages.
(4) Stop button
Stops message recording or playback.
(5) Recording button
Starts message recording.
(6) Save button
Saves recorded messages.
(7) Volume control
Adjusts the message volume level.
The center position is the standard level, with
lower volume to left and higher volume to right.
Pressing the Save button after moving the knob
to either the left or right from the standard level
position resets the standard level to the new
position and saves the message.
Note
If a message is saved while the volume control is
set to the minimum position, the original message
volume cannot be restored even if the volume is
increased.
(8) Read button
Creates original messages by converting WAV-
format files to the original format.
(9) Write button
Converts selected messages to the WAV-format
to save them as files.
(10) list of created messages
Displays the name, recorded time and date, and
message length of saved messages.
Files stored in the [(System name)\Message]
folder located in the Data Folder are shown here.
(1)
(2) (3) (4) (5) (6)
(7)
(10)
(8)
(9)