Toa N-8000 Series - Manual (Page 108)

1-91
Chapter 1 GENERAL DESCRIPTION
11.4.6. Direct select
This function can be used when the system's call response mode is set to "Selective Response." By separately
making an operation panel for a specified Master Station which is equipped with the lamps and buttons
corresponding to other stations, and by assigning the Master Station and other stations to the N-8000DI's
contact input and output channels, the stations that are calling the Master Station are indicated by means of
lamps. Also, operating the desired channel button allows calls to be made between the Master Station and the
station assigned to that channel.
N-8000DI
Specially-made operation panel
(with lamps and buttons)
Calling
Calling
No. 201
No. 202
No. 203
LAN
405
106
306
406
101
201
301
401
102
202
302
402
103
203
303
403
104
204
304
404
105
205
305
206
•
•
The lamp for Station No. 201 flashes if the
Master Station is called by Station No. 201.
Pressing the button for Station No. 201
connects the station to the Master Station.
11.4.7. Calling station indication/CCTV interlock
By installing a lamp type indication board at the specified station, conversation partners and calling stations
that made calls to the specified station during conversation can be displayed on the board. The indication board
can be shared among multiple stations (up to 8 stations) to indicate which station within the group has been
called. It is also possible to use the N-8000MI's, the N-8000DI's, or the N-8000AF's contact for interlocking
the N-8000MI, the N-8000DI, or the N-8000AF with a CCTV system so that a calling party is displayed on the
monitor screen.
N-8000MI/8000DI/8000AF
Specially-made display panel
Calling
No. 301
Camera 1
Camera 3
Camera 2
No. 302
No. 3 03
LAN
CCTV monitor
Camera 1's image
CCTV switcher
300
301
302
308
309
310
316
317
318