Toa N-8000 Series - Manual (Page 294)

2-183
Chapter 2 FUNCTIONS AND OPERATION
OTHER FUNCTIONS (CONVENIENT FUNCTIONS)
Calling in progress
No.201
Station No. 239 with
indication board installed
Station No. 239 with
indication board installed
200
201
202
208
209
210
216
217
218
Conversation in progress
No.201
No.208
Indication board installed
at station No. 239
Indication board installed
at station No. 239
No. 208 in camp-on-busy
2 3 9
2 3 9
200
201
202
208
209
210
216
217
218
N-8000MI/8000DI/8000AF
N-8000MI/8000DI/8000AF
Make contact
Make contact
Station No. 350 with
CCTV monitor installed
Station No. 301's image
Conversation in progress
No.301
CCTV switcher
Make contact
N-8000MI/8000DI/8000AF
9. CALLING STATION INDICATION/CCTV INTERLOCK
(only when the N-8000MI/8000DI/8000AF is used)
By installing a lamp type indication board* at the specified station, conversation partners and calling stations
that made calls to the specified station during conversation can be displayed on the board. The indication board
can be shared among multiple stations (up to 8 stations) to indicate which station within the group has been
called. It is also possible to use the N-8000MI/8000DI/8000AF's contact for interlocking the N-8000MI/8000DI
/8000AF with a CCTV system so that a calling party is displayed on the monitor screen.
* Needs to be separately made to interlock with the Multi interface unit's, Direct select unit’s, or Audio interface
unit’s output.
Note
Use the supplied N-8000 Setting Software to set the N-8000MI/8000DI/8000AF’s contact number and the
stations with the indication board installed. (Refer to p. 5-37 , 5-55 , 5-57 , 5-64 , 5-66 , 5-81 , 5-98 , 5-100 . )
[CCTV interlock example]
• When there is a call to the station with a
CCTV monitor installed, responding to the
call displays the calling station's place on
the monitor.
Note
Operations in this description are based on
the calling station indication mode being set
to "Closed during talk." Perform the setting
using the supplied N-8000 Setting Software.
(Refer to p. 5-37 , 5-55 , 5-64 , 5-98 .)
[Calling station indication example]
• When a station with the indication
board installed is called, the lamp for
the calling station lights. The lamp
goes out when a response is made
to the call and the conversation is
terminated.
• Even if the station with the indication
board installed is on another line
when it is called, the lamp for the
calling station (i.e. station in camp-
on-busy mode) lights.
• The lamp goes out when the party
at the station in camp-on-busy mode
cancels the call.
Note
Operations in this description are
based on the calling station indication
mode being set to "Closed during call
and talk." Perform the setting using the
supplied N-8000 Setting Software.
(Refer to p. 5-37 , 5-55 , 5-64 , 5-98 .)