Toa N-8000 Series - Manual (Page 224)

2-113
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
7.5.2. Simultaneously activating paging, selected zone broadcast, and control output pattern
Broadcasts to the N-8000 paging zone (paging zone and paging zone pattern) and the SX-2000 zone (zone and
zone pattern) can be made at the same time.
When the control output pattern is programmed into the Zone key, SX-2000 control output activation and
each broadcast can be made at the same time. The control output will be deactivated simultaneously with the
completion of broadcast.
Broadcast durations can be limited by preprogramming the time limit (10 − 990 seconds in 10-second units or
1 − 20 minutes in 1-minute units) for each station.
Notes
• Set the paging zone, each time limit (Time out), and priority level using the supplied N-8000 Setting Software.
(Refer to p. 5-121, 5-63, 5-72 .)
• Perform SX-2000 zone pattern* settings and program control output pattern* using the N-8000 Setting
Software. (Refer to p. 5-77 .)
* You can also import the control output pattern or output zone pattern having been set on the SX-2000
Setting Software.
Tip
When making N-8000 Paging call and SX-2000 Selected zone broadcast at the same time, the same operations
regarding pre-announcement paging tone, chime tone, or other paging-related functions are performed to both
systems.
Determine which setting to choose, N-8000 system setting or SX-2000 system setting by the priority settings
( p. 5-73 ) in the N-8000 Setting software.
The table below shows the operations depending on the priority setting.
Priority setting Operation
N-8000 Operates according to the settings of the N-8000 pre-announcement paging tone,
paging delay time, and paging time limit in addition to the Paging call and Selected
zone broadcast.
A pre-announcement paging tone instead of a chime tone is also broadcast to the SX-
2000 system zone.
SX-2000 Operates according to the settings of the SX-2000 chime tone, waiting time, and time
out in addition to the Paging calls and Selected zone broadcast.
A chime tone instead of a pre-announcement paging tone is also broadcast to the
N-8000 system zone.
It is not possible to operate on each different setting that a pre-announcement paging tone is broadcast to the
N-8000 system and a chime tone to the SX-2000 system.