Bgm broadcast, P. 2-35 – Toa N-8000 Series User Manual
Page 146
2-35
Chapter 2
FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
4.2.2. Termination
Step 1. Press the Function key.
Step 2. Select the control pattern to which the function to activate a general broadcast pattern is assigned.
Press the following keys in order.
Multiple control patterns can be sequentially selected by repeating above key operation.
Step 3. Press the [
] key.
The set general broadcast pattern or patterns are selected and activated.
Note
Set the SX-2000 system ID using the supplied N-8000 Setting Software. (Refer to
4.3. BGM Broadcast
The BGM pattern*
2
having been set in the SX-2000 system can be activated.
*
2
A broadcast pattern containing BGM source, output zone, and other preset items. For details, refer to the SX-
2000 Setting Software Instructions.
4.3.1. Activation
Step 1. Press the Function key.
Step 2. Select the control pattern to which a BGM pattern change function is assigned.
Press the following keys in order
Multiple control patterns can be sequentially selected by repeating above key operation.
Step 3. Press the [
] key.
The set BGM pattern or patterns are selected and activated.
In this case, if other BGM has been broadcasting, it will be stopped and overridden by the BGM pattern
broadcast activated with this key.
X
X
2
Y
Y
Y
SX-2000 system ID
number (01 – 08)
Control pattern number*
1
(001 – 162)
*
1
The pattern number having been set using the N-8000 Setting Software.
X
X
5
Y
Y
Y
SX-2000 system ID
number (01 – 08)
Control pattern number*
3
(001 – 162)
*
3
The pattern number having been set using the N-8000 Setting Software.