System function table, Basic functions – Toa N-8000 Series User Manual
Page 83
1-66
Chapter 1
GENERAL DESCRIPTION
7. SYSTEM FUNCTION TABLE
7.1. Basic Functions
IP stations or the system consisting of Exchanges and stations makes the following functions available.
7.1.1. Master station's functions
Function
Description
Reference page
Operation Setting
Conversation
Individual call
The desired party can be called by dialing its station
number.
Redialing
Pressing the Redial key automatically redials the last
number called.
Only the N-8000MS/8500MS/8600MS permits selection
from the most recent 10 numbers.
Recall
The last conversation partner can be recalled by
pressing the [#/ ] key regardless of whether the call
was made or received.
Only the N-8000MS/8500MS/8600MS permits selection
from the most recent 10 numbers.
Voice calling
Holding down the Push-to-talk key while making a call
by means of a continuous call tone permits a voice
calling to be made to the called station. The voice
calling reverts to the original continuous tone call when
the Push-to-talk key is released.
Group call
When a station is assigned to a call group, if the station is
called, all stations within that group are simultaneously
called by a continuous call tone regardless of their call
receiving mode settings. If any one of the stations within
the group responds, calls to the other stations stop.
Incoming
call
selection
Automatic
connection
Incoming calls are automatically connected after a brief
call tone (1 second) or without a call tone.
Continuous call
Calls continue with a continuous call tone (or without a
call tone) and a status indicator continuously flashes as
long as no response is made.
Speed
dialing
Auto-dialing
(N-8000MS/
8500MS/
8600MS only)
The dial operation (up to 20-digit numbers) programmed
into the station’s auto dialer can be performed by one-
touch dialing.
One-touch
dialing
Programming the dial operation (up to 32-digit numbers)
into the station’s [7], [8], [9], [0] or off-hook (with the
handset lifted) keys allows calls or other operation to be
made by one-touch dialing.
Dial pattern
activation
(N-8600MS only)
When the dial operation (up to 380-digit numbers) is
preprogrammed into the N-8600MS as dial pattern,
such programmed call can be made.