Toa N-8000 Series - Manual (Page 84)

1-67
Chapter 1 GENERAL DESCRIPTION
p. 2-15
p. 2-17
p. 2-19
p. 2-20
p. 2-22
p. 2-24
p. 5-35
p. 5-62
p. 5-65
p. 5-80
p. 5-125
p. 5-67
p. 5-82
p. 2-21
Function Description
Reference page
Operation Setting
Hold
Mic off
When it is desirable to hold the line during a conversation,
if any dialing key ([0] – [9]) is pressed, the microphone
is disabled as long as the key is pressed.
Call hold
Pressing the Hold key during a conversation places the
conversation on hold, transmitting a hold tone to both
parties. If the Hold key is pressed again, the hold mode
is cancelled, and the original conversation is restored.
Call transfer*
Current conversations can be placed on hold to
call a third party by pressing the Transfer key. The
original conversation can be subsequently restored
or transferred to the third party after conclusion of the
second call.
Automatic
transfer
Group hunting
Calls to a busy station are automatically transferred to
another designated station, if group hunting function is
set to the called station.
Absence transfer
When no response is made to a call for a set period
of time, the call is automatically transferred to another
designated station.
Call forwarding
Calls to stations are automatically transferred to
another designated station without sounding a call tone.
Programming a station to which a call is to be rerouted
instantly sets that station to the Call forwarding mode.
Time-based
call forwarding
Calls to stations are automatically transferred to
another designated station without sounding a call
tone. Even when the station to which a call is being
rerouted is programmed, the station is not switched to
Call forwarding mode until the set time is reached.
Remote response*
Calls to a station can be answered by pressing the
Push-to-talk key of another station, provided both
stations are assigned to the same group.
Executive priority*
If a called station is busy, as indicated by a busy tone,
pressing the [9] key transmits a short priority call tone,
then forcibly terminates the current conversation,
allowing the call to go through. Access to priority
call operation or refusal of priority calls can be set
individually for each station.
Station speaker volume setting
(except N-8410MS)
Pressing the [#/ ] key during conversation increases
the volume.
Pressing the [ / ] key during conversation decreases
the volume.
p. 2-5 p. 5-65
p. 5-80
* The stations connected to the N-8010EX Exchange or the N-8400RS Substation Interface Unit have
restrictions on use of these functions.
p. 2-14
p. 2-14