Toa N-8000 Series - Manual (Page 157)

2-46
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
5.2. Three-Party Conference
A simultaneous (full duplex) three-party handset conversation can be held by calling up other master stations
in sequence. It is possible to call a conference by calling other stations from the standby mode or by calling a
third party from the two-party conversation mode.
Note
Master stations connected to the N-8010EX/8400RS, N-8610RM IP Remote Microphone Station, outside line
telephones connected to the N-8000CO, and telephones connected to the N-8000AL cannot participate in the
conference.
5.2.1. Initiating a 3-party conference
Step 1. First press the function key and then [5][1], followed by the station number of the desired (second)
party.
When the second party answers, the conversation between the first and second parties can begin.
Call tone
Call
B
A
X X 5 1
Station number of
the second party Function designation number
+ + +
Step 2. Press the Transfer key after the second party has answered.
The second party will then be placed on hold.
A B
Conversation (on hold)