Toa N-8000 Series - Manual (Page 499)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
C/O Interface: Function Settings 1
5-89
Step 2. Set individual items.
(1) Calling station indication/CCTV control
Control output : Set the Multi interface unit's, Direct select unit's, or Audio interface unit’s unit number
and contact output terminal number, which provide a make signal when the station is
called.
Called station's No.: Provides a make contact when the station to be set here is called. Up to 8 stations can
be set.
When the C/O interface unit is set as a called station, enter "#", followed by the
access number. For example, when setting the C/O interface unit with access number
"05," enter "#05".
(Example)
The operation example illustrated below is based on the following settings:
C/O interface unit No.: 1
Control Output
MI Equipment No.: 5
Contact output No.: 3
Called station's No.: 105
(2) Record conversation
Records C/O Interface conversations.
The conversation of the C/O Interface is provided from the audio output of the designated N-8000AF audio
interface unit.
(3) Access to paging call operation
Enables or disables paging calls from the C/O Interface.
(4) Access to scan monitor operation
Enables or disables scan monitor from the C/O Interface.
(5) External equipment control
Set whether the one-shot make contact output or make/break contact output is operated at the C/O
Interface.
N-8000MI (Equipment No. 5)
Contact Output No. 3
Make contact
Call Call
Outside line telephone
No.105
N-8000CO (Equipment No. 1)
1 0 5 X X
(Dial
confirmation tone)
N-8000CO's
outside line number
The Multi interface unit's (equipment No. 5) Contact No. 3 closes when the C/O interface unit (equipment
No.1) calls the station No. 105.