Toa N-8000 Series - Manual (Page 178)

2-67
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
Tie-line
access No.
Intercom system's station No.
Call tone
Y
X X X
Call
N-8000 system Another intercom system
5.6.2. Being called from another intercom system
Dialing the tie-line access number and the N-8000 system's station number at the other intercom system's
station permits the N-8000 system's station to be called. The method for receiving a call from the other intercom
system's station at the N-8000 system's station is the same as when it is called by another station within the
N-8000 system.
Note
Set the tie-line access number to be used by another intercom system at another intercom system side.
Confirmation tone
Tie-line
access No.
Intercom system's station No.
Call tone
X
Y Y Y
Call
N-8000 system Another intercom system
5.6. Tie-Line Connection
(only when the N-8000MI is used)
Using the Multi interface unit for tie-line connection between the N-8000 Series intercom system exchange and
other series intercom system exchanges via 4-wire private lines permits calls, conversations, or paging calls to
be mutually made between stations connected to the tie-line connected exchanges.
Note: This function cannot be used if the system is set to "Selective Response" mode.
4.6.1. Calling another intercom system
Step 1. Press the tie-line access number.
The called intercom system can be connected.
Step 2. After confirming a dial tone from the connected system, dial the station number of the intercom system
to call.
Note
Set the tie-line access number using the supplied N-8000 Setting Software. (Refer to p. 5-46 .)