Updating log files, Confirming the set sound volume, N-8500ms/8600ms only) – Toa N-8000 Series User Manual
Page 594: P. 7-5
7-5
Chapter 7
MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (N-8000MS/8500MS/8600MS only)
3 : L o g f i l e
4 : V o l u m e
4 : V o l u m e
M I C : 2 S P : 3
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
1 0 : 0 8 A M
2 0 0 0
5. CONFIRMINg THE SET SOUNd VOLUME
(N-8500MS/8600MS only)
The microphone sensitivity and speaker output volume set for the N-8500MS/8600MS can be confirmed.
Step 1. Press the Menu key to place the display in setting
mode.
Step 2. Use the down arrow key or the [4] key to move the
cursor to "4: Volume."
Step 3. Press the Select key.
Both set levels for microphone sensitivity (MIC) and
speaker output (SP) are displayed.
The MIC level is indicated in 3 steps from 1 (min.) to
3 (max.), and the SP level in 5 steps from 1 (min.) to 5
(max.).
Step 4. Press the Menu key to return the display to its normal
standby mode.
2 : L i n e m o n i t o r
3 : L o g f i l e
3 : L o g f i l e
U p d a t e d
1 : A u t o - d i a l i n g
2 : L i n e m o n i t o r
1 0 : 0 8 A M
2 0 0 0
4. UPdATINg LOg FILES
Update the file that stores the operation logs for the exchange or N-8500MS/8600MS*.
Use this function when some malfunction has made it impossible to view the operation log via a PC (refer to
, Browser Operation Log Display). Follow the procedures below to update the log file at the station, then
restart the exchange or N-8500MS/8600MS.
* Exchange when the station performing update is N-8000MS, and the N-8500MS/8600MS itself when it is the
N-8500MS/8600MS.
Step 1. Press the Menu key to place the display in setting mode.
Step 2. Use the down arrow key or the [3] key to move the cursor
to "3: Log file."
Step 3. Press the Select key to update the log file of the exchange
to which the station is connected or N-8500MS/8600MS.
Note
The status indicator located on the exchange's front
panel or N-8500MS/8600MS remains lit during the
update process. Do not restart the system or turn off the
power while this light is on.
Step 4. Press the Menu key to return the display to its normal
standby mode.