Toa N-8000 Series User Manual
Page 175

2-64
Chapter 2
FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
No. 61
Call tone
Designated transfer destination telephone
6
2
No. 62
(The originally called station, which has been
set to the Call forwarding mode)
5.5.7. Outside line Call forwarding
Outside line telephones can be designated as the transfer destinations for Call forwarding (refer to
Destinations for both manual and automatic time-interlocked Call forwarding can be set to outside line
telephones.
• The station to which a Call forwarding is to be transferred can be set either by station key operation or by
using the supplied N-8000 Setting Software. (Refer to
• Use the supplied N-8000 Setting Software to enable or disable the outside line Call forwarding function or to
set the transfer start/end time. (Refer to
The station to which a call is to be transferred cannot be designated unless the Call forwarding function is
enabled.
• Settings must allow outside line calling operation.
Use the supplied N-8000 Setting Software to set the outside line access number and enable or disable
outside line calling operation. (Refer to
• Even if the outside line telephone to which a call is made is busy, the call is automatically made to the free
outside line telephone for which the same access number is set. Thereafter, the telephone connected last
becomes the transfer destination telephone.
• When the outside line telephone to which a Call forwarding is to be transferred is busy in conversation with a
door station or substation, calling to the busy telephone continues for 25 seconds. if the line is still busy after
such calls, the Master Station to transfer is called.
Note
Calls received from an outside line telephone are not transferred to the destination station, but only the Master
Station to transfer is called.
[Calls to stations manually set for outside line Call forwarding]
Calls to the station manually set for Call forwarding are automatically transferred to the designated outside line
telephone without sounding a call tone.