Toa N-8000 Series - Manual (Page 466)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
Sub-station Interface: Sub-station Settings
5-56
5.6.3. Sub-station Settings
Step 1. Click "Sub-station Settings" tab to display the following setting screen.
Step 2. Set individual items.
(1) Common settings
Set common functions of all substations to be connected to the substation interface unit.
Call master:
Enter the master station number to be called when each
station's "Call 1," "Call 2," or "Call 3" button is pressed.
Call volume (N-8000RS/8010RS only): Substation call volume can be adjusted in five increments
from 1 (minimum) to 5 (maximum).
The default setting is Level 3.
(2) Each sub-station settings
Set functions of individual substations to be connected to the substation interface unit.
Sub-station Selection:
Choose the line number, substation number or substation
name of the substation from the list.
Choose the Line No. and Sub-station No. or Sub-station name
from the list.