Toa N-8000 Series User Manual

Page 347

3-43

Chapter 3

INSTALLATION & WIRING

N-8650DS

Panel mount frame

Screw

Screw hole

Bottom view

Tab

YS-13A

Install the YC-13A with its

bottom plate removed.

Rear plate

Wall surface

Panel mount frame

Machine screw M4 x 20 (supplied with the N-8650DS)

[N-8650DS]

Attach the N-8650DS to the YS-13A Wall-mount box installed on a wall.

Step 2. Mount the panel mount frame to the back

box.

Step 3. Attach the N-8650DS to the panel mount

frame.

Hook the tabs on the N-8650DS's upper side

into the panel mount frame's slots, fit them

into place, then secure the both bottom sides

with a screw.

Note
Treat unused cables so as not to short-circuit.

Tip
Refer to

for YS-13A dimensional drawing.

The N-8650DS comes with 2 types of screws: M4 x 20

and UNC No. 6-32 x 20. Use the M4 x 20 screw.

Accessory screws

Step 1. Loosen the screw on the N-8650DS's bottom, then detach the panel mount frame.

N-8650DS's bottom

Screw

Panel mount frame