Toa N-8000 Series - Manual (Page 569)

6-22
Chapter 6 SYSTEM SETTINGS USING THE BROWSER
(3) Station on hold
Displays the number of the station on hold.
(4) Status
Displays the operating status of the speech path.
(5) Call receiving
Displays the call tone mode of the IP master station.
(6) automatic transfer
Displays the station number to which calls to the IP master station are to be automatically transferred.
(7) level
Displays sound volume set for the IP master station. Indicator abbreviations are as follows:
MIC: Microphone sensitivity
SP: Speaker output volume
Signal: Call tone volume
[Call-in status]
Displays the call-in status currently being received by the IP master station.
(1) Terminal No.
Displays the IP master station number.
(2) Call-in (Only when the system is set to "Selective Response" mode)
Displays all the station numbers making calls to the IP master station.
Emergency calls are displayed in red.
Note
The call-in status is not displayed in systems set for sequential-answer priority.