Toa N-8000 Series - Manual (Page 142)

2-31
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
3.2. Responding to Paging
If the paged party responds at the nearest station, the paging party is called and put through to the paged
party. "Automatic Response" and "Zone Number Designation Response" modes are available for the paging
response, and the system is preset to one of the two modes. (Refer to p. 5-36 , 5-63 .)
Notes
• In the system when the call response mode is set to "Selective Response," paging response cannot be
performed at a paging receiving station. In this case, respond to the paging after the paging call ends.
• In the system when the call response mode is set to "Sequential Response" and the station paging receiving
mode* set to "Paging priority," paging response cannot be performed at a paging receiving station. Respond
to the paging after the paging call ends.
* The station that receives station paging operates in either Conversation priority mode or Paging priority
mode, which has been already set to the station. (Refer to p. 5-36 , 5-63 .)
3.2.1. Automatic response
If the paged party responds by pressing the Paging Response key, the paging party who made the last page is
called and put through to the paged party.
[Operation]
Press the Paging Response key. The paging party who made the last page is called and put through to the
paged party.
Building A
Zone 1
Speaker
Zone 2
Building B Building C
Zone 3
Speaker
Hello, Mr. TOA.
Please respond.
• Since each paging zone is independent, responding from any station where a paging call is received connects
the paged party to the paging party.