Toa N-8000 Series - Manual (Page 296)

2-185
Chapter 2 FUNCTIONS AND OPERATION
OTHER FUNCTIONS (CONVENIENT FUNCTIONS)
11. CALL/CONVERSATION SYNC CONTACT OUTPUT
(only when the N-8050DS/8540DS/8640DS/8650DS is used)
The contact output of the N-8050DS Door Station or N-8540DS/8640DS/8650DS IP Door Station is closed in
synchronization with its own station's operating status.
The timing that the contact output is closed can be selected from 4 patterns; During call, During talk, During call
and talk, and Status indicator sync.
For example, a revolving light or camera can be controlled in synchronization with call or talk operation.
The N-8640DS/8650DS IP Door Station has 5 contact outputs. The timing that each contact output is closed
can be set individually.
"Status indicator sync" function can be assigned to the contact outputs of 1 through 4 channels only.
Note
Use the N-8000 Setting Software to perform settings for the Door station contact output.
(Refer to p. 5-37 , 5-64 .)
[Example for controlling a revolving light]
N-8050DS/8540DS
/8640DS/8650DS
Contact output
Revolving light
[Door station operation vs. Open/closed status of "Door station contact output"]
During call
Door station contact output
Door station operation
Calling
Being called
Conversation mode
Being paged
Receiving scan monitor
During call
and talk
During talk
Closed
Open
Open
Open
Open
Open
Closed
Closed
Open
Closed
Closed
Closed
Closed
Open
Closed
Status indicator sync
(N-8640DS/8650DS only)
Sequential Response mode: Closed (lit)
Selective Response mode: Closed/open
repeated (flashing)
Closed/open repeated
(flashing)
Closed (lit)
Closed (lit)
Subject to the monitor alert operation
set at the scan-monitoring station
Call waiting Closed Open Closed Closed (lit)