Toa N-8000 Series - Manual (Page 203)

2-92
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S
FUNCTIONS AND OPERATION
1. FUNCTIONS ASSIGNABLE TO THE FUNCTION KEY
N-8610RM
Function key
Talk key
N-8610RM RM-210 Function key
Any one of the functions shown in the table
below can be assigned to the Function keys on
the N-8610RM Remote microphone station and
RM-210 Remote microphone expansion unit.
When the IP Master station's key function has
been assigned to the Remote microphone
station, it is possible to realize the same function
as that available for the IP Master station except
for the functions relating to the handset and LCD.
For the same functions and operation as those of
the IP Master station, refer to "MASTER STATION’S
FUNCTIONS AND OPERATION." on p. 2-2 .
The remote microphone station's distinct
functions and operation will be detailed later.
Hereinafter, Function keys are named with the
assigned function names. (Example: Paging
zone key)
Assignable function Function description
Paging zone selection Selects the zone or paging zone pattern to be paged.
All zone clear Clears all zone selections made at the time of paging calls.
Dial (0 − 9, , ), C, Paging,
Paging response, Hold, Transfer,
Function, Redial
Same functions as those assignable to the N-8000 system's
station keys.
PTT Used when responding to paging calls.
Volume + Increases the station's built-in speaker volume during
conversation.
Volume − Decreases the station's built-in speaker volume during
conversation.
Privacy Used when rejecting incoming calls. Some specifications differ
from those of the RS-140 Switch panel's privacy function.
Station number (Station call) Calls or responds to the designated station.
Dial pattern Activates a dial pattern.
Sift key Used in combination with other key. (Refer to p. 2-115 .)
Mic Indicator Switches the broadcast status indicator to microphone indicator.
Zone selection Selects the zone or zone pattern to be broadcast when making
broadcast to the SX-2000 system. Control output pattern can
also be included.
All zone clear Clears all zone selections made when making broadcast to the
SX-2000 system.
General broadcast pattern Activates or terminates SX-2000 General broadcast pattern.
BGM pattern change Activates SX-2000 BGM pattern.
BGM pattern end Terminates SX-2000 BGM pattern.
Control output Activates or deactivates SX-2000 Control output.
Note: Use the supplied N-8000 Setting Software to assign the functions. (Refer to p. 5-73 )
N
-8
00
0 Sy
st
em f
un
ct
io
n
SX
-2
00
0 Sy
ste
m f
un
ct
io
n