Toa N-8000 Series - Manual (Page 523)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
Direct Select: Network Settings
5-113
(8) WAN port No.
Set the start port number to be used for each protocol as viewed from the WAN side.
[Web server]
Allows entry of the Web server's port number. The valid range is from 1 to 65535. The default factory setting
is 80.
[TCP port]
Allows entry of TCP port start number other than the Web server. The valid range is from 1 to 65532. The
N-8000 system uses 4 consecutive ports starting with the TCP start port. The default factory setting is
5000.
The TCP port is assigned as follows.
Port
Web server
Call control
PC monitoring
PC control
Reservation
Port Number
Web server
Port start number + 0
Port start number + 1
Port start number + 2
Port start number + 3
Protocol
TCP
TCP
TCP
TCP
TCP
Default setting
80
5000
5001
5002
5003