Toa N-8000 Series - Manual (Page 140)

2-29
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
3.1.5. Emergency paging
This function terminates all conversations, paging calls and other functions currently in progress throughout the
system, and simultaneously makes a paging call to all stations, the N-8000EX IP Intercom Exchange's audio
outputs, the N-8000MI Multi-Interface Unit designated as paging output, and N-8000AF Audio Interface Unit's
audio output.
Note
All contact output terminals of N-8000MI and N-8000AF units included in the paging zone are closed.
Step 1. Press the [ ] key four times.
All functions currently in operation are terminated, transmitting a paging pre-announcement tone to all
zones.
Step 2. Page with the handset either lifted or in place.
Note
If the system's paging response mode has been set for Zone number designation response (refer to p.
2-32 ), notify the paged party to respond to [ ] in the paging message.
Step 3. Either press the Clear key or replace the handset.
The paging is completed.
Note
Functions terminated by Emergency paging are not restored, even when the Emergency paging is
completed.
1
3
2
or
C
or
Equipment No. 1
No. 100
Equipment No. 192
Amplifier
Speaker
Equipment No. 2
No. 101 No. 115