Toa N-8000 Series User Manual
Page 82
1-65
Chapter 1
GENERAL DESCRIPTION
6.4.6. SX-200IP IP Interface Module
[Front]
LINK/ACT 10/100M
LAN
RESET RUN
IP INTERFACE MODULE
model SX-200IP
FOR SX-2000 SERIES ONLY
1 2 3
4
1. mAC address
This is the MAC address* for the unit. Since the
relationship of each unit location to its MAC address
is established when setting the network attributes,
keep track of this relationship for later use.
* The inherent address assigned to each network
component, expressed in 12-digit hexadecimal
notation.
2. Reset key [RESET]
Pressing this key reactivates this module.
3. Run indicator [RuN]
Flashes during operation. The indicator also
continuously lights while data is written to an
internal storage memory (FlashMemory).
4. Network connection terminal [LAN]
Connects to a 10BASE-T- or 100BASE-TX-
compatible network. (Ethernet RJ-45 jack)
LNK/ACT indicator (green)
Flashes while transmitting or receiving data.
10/100M indicator (yellow)
Lit when connected to a 100BASE-TX network and
unlit when connected to a 10BASE-T network.
LINK/ACT 10/100M
LAN
LINK/ACT indicator
(green)
10/100M indicator
(yellow)