Toa N-8000 Series - Manual (Page 398)

4-10
Chapter 4 SYSTEM DESIGN FLOW
5.4. Sub Stations
Side TAB Item Default
Reference
page
Network settings IP address * 1, 2 192.168.1.1
SW: p. 5-50
BR: p. 6-5
Subnet Mask * 1, 2 255.255.255.0
Default Gateway * 1, 2 0.0.0.0
Web server port number * 1, 2 80 SW: p. 5-51
BR: p. 6-5
TCP start port number 5000
p. 5-51
UDP start port number 5006
Multicast port number 6000
NAPT compatible Incompatible
Network ID 1
p. 5-52
WAN IP address 192.168.1.1
WAN Web server port number 80
WAN TCP start port number 5000
WAN UDP start port number 5006
Broadcast specification High quality sound
transmission mode p. 5-53
Communication capacity 2990 kbps
Function settings Call time-out No limit
p. 5-54 Conversation time-out No limit
Paging time-out No limit
Paging response mode Zone selection
p. 5-55
Calling station indication During call and talk
Sub-station-interface
Selection
Call master Call 1
-
p. 5-56
Call master Call 2
-
Call master Call 3
-
Call volume 3
Sub-station Selection Line No.
-
Sub-station Selection Sub-station No.
-
Sub-station Selection Sub-station
name
-
Priority Level (Call 1) 1 (5 for RS-144 only)
p. 5-57
Priority Level (Call 2) 1
Priority Level (Call 3) 1
Microphone sensitivity 2
Speaker output 3
Control output / MI/DI/AF equipment No.
-
Control output / Contact output No.
-
Called station's No.
-
Call Activation - push 3 times OFF
with call tone ON
Refusal of priority call operation OFF
Access to emergency call operation OFF
• All of the above items can be set on the N-8000 Setting Software.
* 1 Be sure to set this since settings and conversations are performed via a network.
* 2 Settings possible from a browser as well.