Toa N-8000 Series - Manual (Page 516)

Chapter 5 SYSTEM SETTINGS BY SOFTWARE
Audio Interface: Function Settings
5-106
5.11.2. Function settings
Step 1. Click "Function Settings" tab to display the following setting screen.
Step 2. Set individual items.
(1) Oneshot make time (second)
Sets the duration that the external control output terminals are shorted momentarily.
The setting range is from 1 to 9 (in 1-second units).
(2) Operation mode
Set the operation mode of the audio interface unit.
Unused: This unit is not used.
Aux input paging: Select this item when connecting the Audio interface unit to playback
components or Remote microphone to make paging calls. Paging calls
can be made to the preprogrammed paging zones when the control input
is activated.
Contact input No./Paging No.: Set the paging zone number to be called when the contact input is closed
for each contact input terminal.
Rec: Select this function when recording the station conversation by connecting
the audio interface unit to a recorder, etc.
Time signal: Select this function when playing chime tones or other sound sources at
the fixed time or on the fixed day.
Note
Only a single equipment per system can be set to "Time signal."
"Time signal" item in this operation mode can be selected only for the
equipment for which Time signal has been set on the system settings
screen (refer to p. 5-26 ).
2
3