Toa N-8000 Series - Manual (Page 92)

1-75
Chapter 1 GENERAL DESCRIPTION
7.1.6. Outside line's functions
Function Description
Reference page
Operation Setting
Direct in line call
Calls up to four preprogrammed stations
simultaneously.
p. 2-159 p. 5-90
Direct inward dialing call
Calls the desired station directly via a designated
station.
Paging
Zone paging Calls can be made to one of the preprogrammed zones. p. 2-160
p. 5-89
p. 5-121
Selectable
paging
Calls can be made to up to 50 zones of the
preprogrammed multiple zones.
p. 2-162
All-call paging
Calls can be made simultaneously to all of the
preprogrammed zones.
p. 2-164
Other
functions
Scan monitor
The ambient audio of multiple preprogrammed stations
can be monitored in preprogrammed sequence from
the outside line. Designating the stations by the outside
line operation also permits them to be monitored in
designated sequence.
p. 2-165
p. 5-27
p. 5-89
p. 5-92
External
equipment
control
Using the outside line's function, external equipment
can be controlled by transmitting a one-shot make
output signal or make/break contact signal to the
contact of the designated Multi-Interface, Direct
Select unit, or Audio Interface unit, or by transmitting
a one-shot make output signal to the contact of the
designated door station.
p. 2-173
p. 5-27
p. 5-35
p. 5-43
p. 5-49
p. 5-62
p. 5-89
p. 5-106
p. 5-110
p. 5-114
p. 5-117
Time signal
Schedules can be set, changed or suspended. The
Time Signal operates according to programmed
schedules.
p. 2-167 p. 5-107