Toa N-8000 Series - Manual (Page 222)

2-111
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
7.3. BGM Broadcast
The BGM pattern* having been set in the SX-2000 system can be activated.
* A broadcast pattern containing BGM source, output zone, and other preset items. For details, refer to the SX-
2000 Setting Software Instructions.
7.3.1. Using the BGM pattern change key
Step 1. Press the BGM pattern change key.
The set BGM pattern is selected and activated.
(When other BGM is being broadcast, it is stopped and
replaced with the BGM pattern assigned to the pressed
key.)
Step 2. Press the BGM pattern end key.
BGM is terminated.
All indicators go out.
Tip
Assign the key different from the BGM pattern change key as the BGM pattern end key in advance.
7.3.2. Using dial keys
When dial keys are assigned to the Function keys, BGM broadcast pattern can be activated with the same dial
operation ( p. 2-35 ) as that of the N-8600MS's BGM pattern start.
7.4. Control Output Activation
The SX-2000 Control output can be activated.
7.4.1. Using the Control output key
Step 1. Press the Control output key.
The set SX-2000 control output is activated.
The selection indicator lights green and the status
indicator lights orange.
Step 2. Press the Control output key again.
Control output is deactivated.
All indicators go off.
7.4.2. Using dial keys
When dial keys are assigned to the Function keys, control output can be activated with the same dial operation
( p. 2-37 ) as that of the N-8600MS's control output activation.
BGM pattern
end key
BGM pattern
change key
Green
(Lights only
when pressed)
Selection indicator
Control output key
Green Orange
Control output key
Status indicator
Selection indicator