Toa N-8000 Series - Manual (Page 217)

2-106
Chapter 2 FUNCTIONS AND OPERATION
REMOTE MICROPHONE STATION'S FUNCTIONS AND OPERATION
7. BROADCAST TO SX-2000 SYSTEM
(only when using SX-200IP)
7.1. Selected Zone Broadcast
Broadcasts can be made to the zone(s), or zones assigned to a zone pattern* within the SX-2000 system.
Broadcast durations can be limited by preprogramming the time limit (between 1 and 20 minutes in 1-minute
units) for each station. (Only when the Talk key is set to "LOCK")
* A pattern into which multiple zones are grouped.
Tips
• Perform zone pattern settings using the N-8000 Setting Software. You can also import and use the output
zone pattern having been set on the SX-2000 Setting Software. (Refer to p. 5-77 .)
• Set the time limit (Time out) using the supplied N-8000 Setting Software. (Refer to p. 5-72 .)
7.1.1. Using the SX-2000 zone selection key
Paging calls can be made to the preprogrammed zones (zone and zone broadcast pattern).
[When the Talk key is set to "LOCK"]
Step 1. Press the SX-2000 zone selection key. (Zone selection)
Multiple zones and zone patterns can also be selected in
combination by pressing 2 or more keys in sequence.
The selection indicator of the selected key lights green.
Tips
• When the status indicator is flashing green, broadcast
is being made by other equipment to a part or all of the
zones set to the SX-2000 zone selection key.
• To clear selection, press the SX-2000 zone selection key
again.
• To clear selection of all zones simultaneously, press the
All zone clear key.
Step 2. Press the Talk key. (Broadcast start)
The chime tone will be broadcast.
In this event, the chime tone is heard
through the station's built-in speaker.
The microphone indicator of the Talk
key flashes green while the chime tone
is being sounded.
Note
The chime tone can be set to "None."
Use the supplied N-8000 Setting Software to perform chime tone setting. (Refer to p. 5-72 .)
SX-2000 zone
selection key
(Zone 1)
SX-2000 zone
selection key
(Zone 8 and
Zone pattern 02) Green
Status indicator
(Example)
Selection indicator
Green Orange
Orange
Broadcast status indicator
Microphone indicator
Flashes
green
Talk key
SX-2000 zone
selection key
(Zone 1)
SX-2000 zone
selection key
(Zone 8 and
Zone pattern 02)