Toa N-8000 Series - Manual (Page 229)

2-118
Chapter 2 FUNCTIONS AND OPERATION
DOOR STATION'S FUNCTIONS AND OPERATION
1.2. Calling from a Door Station
(when the system is set to "Selective Response" mode)
Step 1. Press the call button to call the pre-programmed master station or telephone.
The status indicator flashes.
Note
When the call time limit has been set, if no response is made within a set
period of time, the call is automatically terminated.
Step 2. If the master station or the telephone
responds, a brief call tone is sounded.
Speak toward the panel.
Note
The status indicator mode changes from
flashing to steady-on state.
Conversation is terminated if the called party replaces the handset of the master
station or telephone, or presses the Clear key.
Note: The status indicator goes out when the conversation ends.
Notes
• Preprogram the master station or the telephone to call to.
Programming can be performed by dialing operation of the multifunctional master station (refer to p. 7-9 ) or
using the supplied N-8000 Setting Software (refer to p. 5-68 , 5-83 ).
• Use the supplied N-8000 Setting Software to perform call time-out function setting. (Refer to p. 5-36 , p.
5-63 .)
Flashes
Brief call tone Steady-on