Other functions – Toa N-8000 Series User Manual

Page 93

1-76

Chapter 1

GENERAL DESCRIPTION

7.2. Other Functions

Function

Description

Reference page

Operation Setting

Priority

Response Priority:

When the system's call response mode is set to

"Selective Response" and a station simultaneously

receives multiple calls, priorities can be assigned to

calls to be responded to.

Call Priority:

Priorities can be assigned to calls. If a higher priority

station or paging call is made to a station currently

in use, that station's conversation or other current

operation is forcibly interrupted.

Time-out

This function terminates or cancels a call if the user

forgets to do so.

Limits can be set for calling time, conversation time

and paging time.

p. 2-178

p. 5-36,

p. 5-43

p. 5-54

p. 5-63

p. 5-90

p. 5-98

Recording

Setting the Audio Interface Unit's operation mode

to Conversation Recording allows the recording of

conversations, conferences, paging calls and scan

monitoring of the Master Stations and telephones

(used instead of stations). It is also possible to record

conversations of the outside line telephones. Such

conversations and conferences are recorded on

recorders connected to the Audio Interface Unit.

Group blocking

By preprogramming groups of stations that can only

call restricted stations, operations for making calls or

paging between groups can be restricted.

p. 2-179 p. 5-123

Paging delay output

This function controls the audio output according to

the connected external equipment's activation time.

Delay time can be inserted into the time duration

from paging completion to paging pre-announcement

tone output (or paging commencement). The contact

that provides output in synchronization with paging

activation closes upon paging completion, irrespective

of the delay time setting.

Paging pre-announcement

tone output control

Paging can be initiated without using a paging pre-

announcement tone. Use of the pre-announcement

tone is selectable.

External input paging

Activating the control input after connecting the

Remote microphone or playback components to the

N-8000MI/8000AF enables broadcasting to the

preprogrammed zone(s).

p. 2-181 p. 5-45

p. 5-106

Paging sync contact output

control

The contact output of both the N-8000MI and

N-8000AF interface units can be set as the paging

output destination. This makes it possible to control

connected external equipment in synchronization with

paging activation.

p. 2-182 p. 5-122

Calling station indication/

CCTV interlock

Closing the Multi interface unit's, the Direct select unit's,

or the Audio interface unit's contact in synchronization

with calls received enables calling station indication or

CCTV system control.

p. 5-81

p. 5-100