Toa N-8000 Series - Manual (Page 133)

2-22
Chapter 2 FUNCTIONS AND OPERATION
MASTER STATION'S FUNCTIONS AND OPERATION
Calling
PTT
6 2
No. 62
No. 60
No. 62
No. 60
Continuous call tone
Conversation
Remote Response group
Remote Response group
2.7. Remote Response
(only when the system is set to "Sequential Response" mode)
When a station is being called, such calls can be answered by another station instead if these stations are
assigned to the same group.
Up to 16 stations can be set to a Response group.
The Remote Response function can only be used while calls are being made by a continuous call tone.
The Remote response function cannot be used for answering a call made by the group call function.
Notes
• Remote Response group can be set either by dialing operation (see p. 2-23 ) or using the supplied N-8000
Setting Software. (Refer to p. 5-125 .)
• The stations connected to the N-8010EX/8400RS cannot be assigned to the Remote Response group.
[Operation example]
Press the Push-to-talk key while the station assigned to the same Remote Response group (Example 62) is
being called by a continuous call tone.
The party (Station No. 60) who pressed the Push-to-talk key can
respond instead of the called station (No. 62).